80mm Pin Diameter Excavator Attachment Headstock

This is typically a 10 – 16 Tonne Excavator Headstock – manufactured with a 80mm diameter.

Please see the information below, with details as to how to order above:

Enter Your Excavator’s Make & Model
Let us know your excavator’s make & model – a member of our sales team will contact you to verify the pin diameter, pin width and pin centres.

Pin Type – This refers to how the pins are mounted into the headstock.
You can choose from 2 options:

1. Welded – Choose welded pins if you have a suitable spring, ratchet type or hydraulic quick hitch on your excavator.
2. Removeable – Choose removeable pins if you do not have a quick hitch or would like the ability to remove them. These are sometimes referred to as dummy pins.
3. ** NOTICE **Due to manufacturing capacity constraints, we are currently only able to supply headstocks to fit JB Equipment branded products.

   Bolt Hole Pattern
   You can choose from 3 different options:

   1. None – No holes will be cut, allowing you to drill your own or simply weld the headstock onto your desired equipment.
   2. Standard – The headstock will be supplied with a series of bolt holes based on the excavator information you provide. These will not align and fit onto your existing attachment’s holes, but they will give you a template to create a new fixing point.
   3. Customer Defined – Choose this option if you want the headstock to fit straight onto your attachment, such as the top of a hydraulic breaker. You will need to provide us with detailed measurements, so please Contact Us before or after ordering, and our team will advise how to do this.